Home Calendar Speedsters Event-Photos Engines Technical Construction John-Blacks-#917 WoodCars Model-A-Chassis Speedster-Design Survey Planking SidePlanking TopPlanking TailPlanking CNCRouter Model Strongback Strip-Building Bodies Heads Carbs Water-Pumps HighPerformance RearEnd-Tranny Front-Ends Wire-Wheels Engines All-Vintage-Ford Clubs-Museums Racing Hill-Climbs Endurance-Runs GreatAmericanRace Historics Automobilia Organization ContactUs |
Side Planking Patterns |
||
I think Stripes should be used to accent the natural lines of the car. | |||
I'll use the three 1/2" planks to add a Dark/Light/Dark stripe along the bottom edge of the hood and edge of the back deck. | |||
|
|||
Several Lower Accent Stripes can be considered : (click to enlarge) | |||
2" Bottom Edge | 2" Frame Line | ||
Thin 1/2" Frame Line | With Triple 1/2" Frame Lines | ||
2" Frame & 3" Bottom | 2" Frame & Bottom | ||
Plain Side | With Wide Bottom | ||
|
|||
I like the Triple 1/2" Frame Lines |
|||
|
|||
Home || Calendar || Speedsters || Events || Engines || Technical || Historics || Organization || Contact Us |
|||
Copyright 2002 and succeeding years -- Northwest Vintage Speedsters |
|||
Suggestions or Comments on Our Web Site ? |