Home
Calendar
Speedsters
Event-Photos
Engines
Technical
   Construction
     John-Blacks-#917
        WoodCars
        Model-A-Chassis
          5-Speed
          Brakes
          DriveLine
          Engine
          Flywheel
          Front-End
          Radiator
          Rear-End
          Steering
        Speedster-Design
        Survey
        Planking
        CNCRouter
        Model
        Strongback
        Strip-Building
   Bodies
   Heads
   Carbs
   Water-Pumps
   HighPerformance
   RearEnd-Tranny
   Front-Ends
   Wire-Wheels
   Engines
   All-Vintage-Ford
   Clubs-Museums
   Racing
   Hill-Climbs
   Endurance-Runs
   GreatAmericanRace
Historics
Automobilia
Organization
ContactUs

Chassis

The Chassis comes first. The Body follows the Chassis.............but it is an iterative process. 

I started with a stock 1930 Model A Ford.  Now I have a balanced  engine from H&H Antique

This Rebuild included these improvements
          - Engine - Exhaust Header, DownDraftCarb, Oil Filter System, 12v, Electronic Ignition
          - Hydraulic Brakes

It is now in the middle of its second build to change it as follows :
          - Move Radiator forward and lower it, Install Electric Fan
          - Narrow the Frame at the Rear
          - Convert to Open Drive Shaft
          - Install Borg Warner 5 Speed with overdrive from a Chev S10 pickup
          - Lighten Flywheel
          - Convert to 56 Ford Pickup Steering Box and Lower Steering Wheel
The design I'm doing is based on the frame as it will exist at the end of this second rebuild. 

Other improvements I have not ruled out might include :
         - Lower Front End
         - Lower Rear End

Home  ||  Calendar  ||  Speedsters  ||  Events  ||  Engines  ||  Technical  ||  Historics  ||  Organization  ||  Contact Us

Copyright 2002 and succeeding years -- Northwest Vintage Speedsters

Suggestions or Comments on Our Web Site ?
Contact : WebMaster at nwvs.org