 Home Calendar Speedsters Event-Photos Engines Technical Construction John-Blacks-#917 WoodCars Model-A-Chassis Speedster-Design Survey Planking CNCRouter Model Strongback Strip-Building Orca Boat Shop The Stem Bottom Coat1 Coat2 Coat3 Starting MidWay Complete Sand Problems PreGlass Glassing Epoxy Sand Inside Glassin Hood Fender Fitting Structure Bodies Heads Carbs Water-Pumps HighPerformance RearEnd-Tranny Front-Ends Wire-Wheels Engines All-Vintage-Ford Clubs-Museums Racing Hill-Climbs Endurance-Runs GreatAmericanRace Historics Automobilia Organization ContactUs |
|
|
Bottom Rear |
|
|
|
|
|
|
|
Building the Bottom Rear was my first planking experience. Its Skill & Art. The wood pieces are different colors. The first step is to array the pieces according to color. If any pieces have defects, this is the time to find them. Some of the defects are hard to see as I discuss on the Problems Page. Building the Bottom Rear was a great first effort. It is a small project that takes you through all the steps involved in creating a strip built shape. It didn't have to be built first, but I'm glad I did it that way. It could have been built last and attached to the main body at the end. |
|
|
|
|
|
|
|
Home || Calendar || Speedsters || Events || Engines || Technical || Historics || Organization || Contact Us |
|
|
Copyright 2002 and succeeding years -- Northwest Vintage Speedsters |
|
|
Suggestions or Comments on Our Web Site ? |
|